The New Jersey Institute of Technology's Electronic Theses & Dissertations Project

Return to adviser list...
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All

Khusid, Boris - 25 ETDs Online (Report generated on 06/19/2013)

Year	Author	Title
2010	Manning, Thelma Gatuz, PhD	Novel micron- and nano-scale energetic materials for advanced gun propulsion, their material properties, and their effects on ballistic performance
2010	Narayanan, Gopal Thirumalai, MS	A study of probability distributions of DCT coefficients in JPEG compression
2004	Bennett, Dawn J., PhD	Dielectrophoretic manipulation of biological and non-biological analytes in a microfluidic channel
2003	Gokhale, Abhijit Aniruddha, MS	Synthesis of nano/micro particles using supercritical method and particle characterization
2003	Markarian, Nikolai, PhD	Theoretical and experimental studies of the field-induced phenomena in flowing suspensions
2002	Attri, Ravi Shankar, MS	Current requirements by electro hydrodynamic filter systems under shipboard operation conditions

Year	Author	Title
2011	Beach, Lauren Elizabeth, PhD	Effect of dry particle coating on the properties of cohesive pharmaceutical powders
2011	Ha, Jin Uk, PhD	Study of controlled release of active pharmaceutical ingredients from functionalized nanoclays and polymer matrices
2011	To, Daniel, PhD	Deagglomeration and mixing via the rapid expansion of high pressure and supercritical suspensions
2009	Mohan, Salil, PhD	Experiment and modeling : ignition of aluminum particles with a CO2 laser
2008	Beloni, Ervin, MS	Ignition of metal powder by electrostatic discharge stimulation
2008	Sheth, Miraj Minesh, MS	Ultra-fine particle formation using principle of rapid expansion of supercritical solutions`
2008	Stamatis, Demitrios, MS	Fully dense aluminum-rich aluminum copper oxide powders for energetic formulations
2008	Zhou, Quyuan, PhD	Degradation of polylactic acid in the presence of microsize and nanosize fillers
2007	Umbrajkar, Swati M., PhD	Synthesis and analysis of reactive nanocomposites prepared by arrested reactive milling
2006	Trunov, Mikhaylo Aleksiyovych, PhD	Effect of polymorphic phase transformations within an alumina layer on the ignition of aluminum particles
2006	Zhu, Xiaoying, PhD	Synthesis and characterization of mechanically alloyed aluminum-based compounds as high energy density materials
2005	Ermoline, Alexandre, PhD	Experimental technique for studying high-temperature phase equilibria in reactive molten metal based systems
2005	Florio, Laurie Ann, PhD	Investigation of static and dynamic enhancement of laminar natural convection cooling of electronics
2005	Lee, Sang Hwui, PhD	The feasibility of micromachined dynamic resonant beam coriolis true mass flow meter
2004	Eapen, Binu Zacharia, MS	Combustion of aerosolized spherical aluminum powders and flakes in air
2004	Mohan, Salil, MS	Characterization of aluminum powder ignition
2003	Milovs, Vadims, MS	Computer simulation of automotive disc brake noise
2003	Mudryy, Ruslan, MS	Experimental study of ignition of mechanical alloy and pure metal powders
2002	Chen, Wenliang, PhD	Numerical simulation of mechanofusion system for dry particle coating process