Do industrial back support belts reduce stress in asymmetric lifting?
Department of Industrial and Manufacturing Engineering
Master of Science
Occupational Safety and Health Engineering
Sengupta, Arijit K.
Abdou, George Hanna
Blanchard, Harry Edward
Back support belt
The objective of this research is to determine the effects of wearing a back support belt during repetitive asymmetric lifting in terms of heart rate, blood pressure, static lift capacity, body discomfort rating and subjective rating concerning the effectiveness of a back support belt. The type of belt used in this study was of knit nylon and elastic construction designed for industrial use.
Eight female participants lifted a crate from the table to knuckle height at a rate of three lifts per minute for a period of 20 minutes; one set with wearing back support belt and one without back support belt. The weight of the box was then adjusted to participants’ maximum acceptable weight of lift, which range between 9kg to 10kg. The overall average heart rate (HR) was reduced from 96.2 beats per minute (bpm) to 90.9 bpm when back support belt was worn, and the reduction was statistically significant (P<0.05). Average systolic and diastolic blood pressure reduced from 114/71 to 106/64 with back support belt, but reduction wasn’t statistically significant. Body discomfort ratings and static lift capacity did not register any systematic or significant change. Subjective ratings strongly favored wearing of back support belt. Results supported the effectiveness of back support belts in reducing physiological stresses, possibly by increasing the structural support at the lower back and thereby reducing muscular activity in the lower back area.
njit-etd2006-121 (67 pages ~ 3,242 KB pdf)
Please complete this Feedback Form to inform us about your experience using this website. It will assist us in better serving your information needs in the future. Thank You!
Created October 2, 2007