NJIT eTD::njit-etd1999-020::Das, Shyam::"Production of pulsed low energy electron beams"

In this thesis, an experimental setup for the production of low energy electron beams based on Explosive Electron Emission (EEE) is used to study the transmission of pulsed low energy electron beams through silicon nitride foils. The electron beam density before and after the foil are measured. The experimental values fully agree with the theoretical estimates. Work done in this thesis is a judicious combination of vacuum technology, pulsing of high voltage sources, thermal physics and electronics. Dia rams and -photo uaphs of the experimental setup arl-I presented. A paper was 9 presented at the American Vacuum Society (AVS) symposium at Rutgers University in New Brunswick in May 1997 to the effect of this work.

Title:	Production of pulsed low energy electron beams
Author:	Das, Shyam
Document Type:	Thesis
Department:	Department of Physics
Degree:	Master of Science
Major:	Applied Physics
Advisory Committee:	Chin, Ken K. Korenev, S. A. Russo, Onofrio L.
Thesis Date:	1999, August
Keywords:	Explosive electron emission (EEE) Pulsed low energy electron beams Silicon nitride foils
Availability:	Unrestricted
Abstract:	In this thesis, an experimental setup for the production of low energy electron beams based on Explosive Electron Emission (EEE) is used to study the transmission of pulsed low energy electron beams through silicon nitride foils. The electron beam density before and after the foil are measured. The experimental values fully agree with the theoretical estimates. Work done in this thesis is a judicious combination of vacuum technology, pulsing of high voltage sources, thermal physics and electronics. Dia rams and -photo uaphs of the experimental setup arl-I presented. A paper was 9 presented at the American Vacuum Society (AVS) symposium at Rutgers University in New Brunswick in May 1997 to the effect of this work.
Complete Thesis:	njit-etd1999-020 (38 pages ~ 1,558 KB pdf)
Feedback:	Please complete this Feedback Form to inform us about your experience using this website. It will assist us in better serving your information needs in the future. Thank You!